• Schneider BMXP3420302CL Processor module M340 - without memory card - max 1024 discrete - CANOpen

Schneider BMXP3420302CL Processor module M340 - without memory card - max 1024 discrete - CANOpen

Main
range of product
Modicon M340 automation platform
product or component type
Processor module
condition of use
Requires a memory card to work (not supplied)
concept
CANopen
Transparent Ready
number of racks
4
number of slots
11
discrete I/O processor capacity
1024 I/O multi-rack configuration
704 I/O single-rack configuration
analogue I/O processor capacity
256 I/O multi-rack configuration
66 I/O single-rack configuration
number of application specific channel
36
Complementary
control channels
Programmable loops
motion control
Independent axis CANopen
integrated connection type
Ethernet TCP/IP RJ45 10/100 Mbit/s 1 twisted pair
USB port 12 Mbit/s
CANopen master bus SUB-D 9 20 kbit/s...1 Mbit/s 2 twisted shielded pairs
communication module processor capacity
2 Ethernet communication module
4 AS-Interface module
embedded communication service
Bandwidth management, Ethernet TCP/IP
Data Editor, Ethernet TCP/IP
Modbus TCP messaging, Ethernet TCP/IP
Rack Viewer, Ethernet TCP/IP
SNMP network administrator, Ethernet TCP/IP
Network management (NMT) CANopen
Process Data Object (PDO) CANopen
Service Data Object (SDO) CANopen
Special functions (SYNC, EMCY, TIME) CANopen
port Ethernet
10BASE-T/100BASE-TX
transmission rate
1 Mbit/s 0...20 m 0...0.6 m
125 kbit/s 0...500 m 0...10 m
20 kbit/s 0...2500 m 0...300 m
250 kbit/s 0...250 m 0...10 m
50 kbit/s 0...1000 m 0...120 m
500 kbit/s 0...100 m 0...10 m
800 kbit/s 0...40 m 0...6 m
bus type
CANopen M20 DS 301 V4.02 devices linked by daisy-chaining or tap junctions CSMA/CA
CANopen M20 DS 303-2 devices linked by daisy-chaining or tap junctions CSMA/CA
CANopen M20 DS 405 devices linked by daisy-chaining or tap junctions CSMA/CA
number of slave
63 CANopen
number of devices per segment
0...16 <= 205 m CANopen
0...32 <= 185 m CANopen
0...64 <= 160 m CANopen
memory description
4096 kB internal RAM
256 kB internal RAM for data
3584 kB internal RAM for program constants and symbols
maximum size of object areas
256 kB unlocated internal data
32634 %Mi located internal bits
default size of object areas
1024 %MWi internal words located internal data
256 %KWi constant words located internal data
512 %Mi located internal bits
application structure
1 periodic fast task
64 event tasks
1 cyclic/periodic master task
No auxiliary task
execution time per instruction
0.12 µs Boolean
0.17 µs double-length words
0.25 µs single-length words
1.16 µs floating points
number of instructions per ms
6.4 Kinst/ms 65 % Boolean + 35 % fixed arithmetic
8.1 Kinst/ms 100 % Boolean
system overhead
0.13 ms fast task
0.7 ms master task
current consumption
135 mA 24 V DC
supply
Internal power supply via rack
marking
CE
status LED
1 LED green activity on Ethernet network (ETH ACT)
1 LED green integrated machine/installation bus operational (CAN RUN)
1 LED green processor running (RUN)
1 LED green status of Ethernet network (ETH STS)
1 LED red data rate (ETH 100)
1 LED red I/O module fault (I/O)
1 LED red integrated machine/installation bus fault (CAN ERR)
1 LED red memory card fault (CARD ERR)
1 LED red processor or system fault (ERR)
1 LED yellow activity on Modbus (SER COM)
product weight
0.215 kg

Environment
ambient air temperature for operation
0...60 °C
relative humidity
10...95 % without condensation
IP degree of protection
IP20
protective treatment
TC
directives
2012/19/EU - WEEE directive
2014/35/EU - low voltage directive
2014/30/EU - electromagnetic compatibility
standards
EN 61000-6-2
EN 61131-2
EN 61000-6-4
EN 61010-2-201

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
BMXP3420302CL

Schneider BMXP3420302CL Processor module M340 - without memory card - max 1024 discrete - CANOpen

Schneider
2025-05-22
  • Brand: Schneider
  • Product Code: BMXP3420302CL
  • Availability: 10
  • $1,000.00

  • Ex Tax: $1,000.00

Tags: BMXP3420302CL