• Schneider LXM32MC10N4 Motion servo drive

Schneider LXM32MC10N4 Motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 11 kW

Main
range of product
Lexium 32
product or component type
Motion servo drive
device short name
LXM32M
format of the drive
Book
network number of phases
Three phase
[Us] rated supply voltage
200...240 V (- 15...10 %)
380...480 V (- 15...10 %)
supply voltage limits
170...264 V
323...528 V
supply frequency
50/60 Hz (- 5...5 %)
network frequency
47.5...63 Hz
EMC filter
Integrated
continuous output current
40 A (f = 4 kHz)
output current 3s peak
100 A for 5 s
maximum continuous power
11000 W at 400 V
nominal power
11 kW at 400 V (f = 4 kHz)
line current
23.3 A, THDI of 140 % at 480 V, without line choke
32 A, THDI of 54 % at 480 V, with external line choke of 0.5 mH
38.1 A, THDI of 70 % at 380 V, with external line choke of 0.5 mH
Complementary
switching frequency
4 kHz
overvoltage category
III
leakage current
<= 30 mA
output voltage
<= power supply voltage
electrical isolation
Between power and control
type of cable
Single-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR
electrical connection
Terminal cable 8 mm² AWG 8 (CN8)
tightening torque
3.8 N.m (CN8)
discrete input number
2 capture
discrete input type
Capture (CAP)
sampling duration
0.25 ms
discrete input voltage
24 V DC for capture
discrete input logic
Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
response time
<= 5 ms (compliment of STO_A, compliment of STO_B)
discrete output number
3
discrete output type
Logic (DO) 24 V DC
discrete output voltage
<= 30 V DC
discrete output logic
Positive or negative (DO) conforming to EN/IEC 61131-2
contact bounce time
<= 1 ms (compliment of STO_A, compliment of STO_B)
braking current
50 mA
response time on output
250 µs (DO) discrete
control signal type
Pulse train output (PTO) RS422 <= 500 kHz <= 100 m
protection type
Against reverse polarity :inputs signal
safety function
STO (safe torque off), integrated
safety level
SIL 3 conforming to EN/IEC 61508
communication interface
Integrated Modbus
connector type
RJ45 (labelled CN7) :Modbus
commissioning port
2-wire RS485 multidrop Modbus
transmission rate
9600, 19200, 38400 bps for bus length of 40 m Modbus
number of addresses
Modbus
status LED
1 LED (red) servo drive voltage
signalling function
Display of faults in 7 segments
marking
CE
operating position
Vertical +/- 10 degree
product compatibility
Servo motor BMH (190 mm, 1 motor stacks)
Servo motor BMH (190 mm, 2 motor stacks)
Servo motor BMH (190 mm, 3 motor stacks)
Servo motor BMH (190 mm, 4 motor stacks)
width
180 mm
height
385 mm
depth
240 mm
product weight
9.6 kg

Environment
electromagnetic compatibility
Conducted EMC at class A group 1 conforming to EN 55011
standards
EN/IEC 61800-3
product certifications
CSA
IP degree of protection
IP20 conforming to EN/IEC 60529
vibration resistance
1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60028-2-27
pollution degree
2 conforming to EN/IEC 61800-5-1
environmental characteristic
Classes 3C1 conforming to IEC 60721-3-3
relative humidity
Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
ambient air temperature for operation
0...50 °C conforming to UL
ambient air temperature for storage
-25...70 °C
type of cooling
Integrated fan
operating altitude
<= 1000 m without derating

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
LXM32MC10N4

Schneider LXM32MC10N4 Motion servo drive

Schneider
2025-05-23
  • Brand: Schneider
  • Product Code: LXM32MC10N4
  • Availability: 10
  • $1,000.00

  • Ex Tax: $1,000.00

Tags: LXM32MC10N4