Panasonic MINAS A6 Family MADLT15NF Servo Driver
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MADLT15NF |
| Details | A6NF series RTEX Ultra high-speed Network type (Multi type) with the safety function |
| Family Name | MINAS A6 |
| Series | A6NF series |
| Type | RTEX, Ultra high-speed Network type (Multi type) |
| Frame | A-Frame |
| Frequency response | 3.2 kHz |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | RTEX |
| Dimensions (W) (Unit: mm) | 40 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 130 |
| Mass (kg) | 0.8 |
| Environment | For more details, please refer to the instruction manual. |
Basic Specifications
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 to 240V +10% -15% 50/60 Hz |
| Input power: Control circuit | Single phase 200 to 240V +10% -15% 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multiturn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. Serial communication is also supported. |
| Parallel I/O connector: Control signal Input | Each 8 input can be assigned by the parameter. |
| Parallel I/O connector: Control signal Output | Each 3 input can be assigned by the parameter. |
| Parallel I/O connector: Analog signal Output | 2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Output | Line driver output for encoder pulses (A/B phase signal) or external scale pulses. |
| Communication function | RTEX, USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RTEX | Communication for transmission of a real-time operation command, the parameter setting, or the status monitoring. |
| Regeneration | No built-in regenerative resistor (external resistor only) |
| Control mode | [1]. Semi-closed control Position control: Profile position control [PP], Cyclic position control [CP] Velocity control: Cyclic velocity control [CV] Torque control: Cyclic torque control [CT] [2].Full-closed control Position control: Profile position control [PP], Cyclic position control [CP] *The two modes, [1] and [2] above are switched by parameters. * Switch PP/CP/CV/CT mode according to the RTEX communication command. |
Panasonic MINAS A6 MADLT15NF Servo Driver
- Brand: Panasonic
- Product Code: MADLT15NF
- Availability: 10
-
$1,000.00
- Ex Tax: $1,000.00
Tags: MADLT15NF