Panasonic MINAS A5 Family MHMD082S32N Servo Motor 200V 750W

Spec Detail

Item	Specifications
Part Number	MHMD082S32N
Details	Servo motor with Gear reducer, High inertia, Lead wire type, IP44
Family Name	MINAS A5
Series	MHMD Series
Type	High inertia
Enclosure	IP44
About Enclosure	at gear reducer
Environmental Conditions	For more details, please refer to the instruction manual.
Motor lead-out configuration	Lead wire
Motor encoder connector	Lead wire
Power supply capacity (kVA)	1.3
Voltage specifications	200 V
Rated output	750 W
Rated current (A (rms))	1.3
Holding brake	without
Mass (kg)	5.9
Gear reduction ratio	1/9
Gear type	For high precision
Shaft	Key-way
[About Characteristic of Gear Reducer]	The output, rated rotational speed, maximum rotational speed, rated torque, instantaneous maximum torque of the geared servomotor are values on the output shaft of the gear.
Output (W)	635
Rated torque (N ⋅ m)	18.2
Momentary Max. peak torque (N ⋅ m)	54.7
Max. current (A (o-p))	17.0
Regenerative brake frequency (times/min)	Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4283
Rated rotational speed (r/min)	333
Rated rotational Max. speed (r/min)	500
Moment of inertia of rotor ( x10^-4 kg ⋅ m²)	2.16
Recommended moment of inertia ratio of the load and the rotor	10 times or smaller
Rotary encoder: specifications	17-bit Absolute/Incremental system
Notice	When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder.
Rotary encoder: Resolution	131072

Item	Specifications
Radial load (N)	1470
Thrust load (N)	735

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Qty