Panasonic MINAS E series MUMA011P1T Servo Motor 100V 100W
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MUMA011P1T |
| Type | Ultra low inertia |
| Enclosure | IP65 |
| About Enclosure | Except rotating portion of output shaft and leadwire end. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Voltage specifications | 100 V |
| Rated output | 100 W |
| Rated current (A (rms)) | 1.6 |
| Holding brake | with |
| Mass (kg) | 0.70 |
| Oil seal | without |
| Shaft | Key-way, center tap |
| Rated torque (N ⋅ m) | 0.32 |
| Momentary Max. peak torque (N ⋅ m) | 0.95 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P2890 |
| About regenerative brake frequency | Note) 1. Regenerative brake frequency represents the frequency of the motor's stops from the rated speed with deceleration without load. ⋅ If the load is connected, frequency will be defined as 1/( m + 1 ), where m = ( load moment of inertia ) / ( rotor moment of inertia ). ⋅ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of ( running speed / rated speed ). ⋅ Power supply voltage is AC115 V ( at 100 V of the main voltage ). If the supply voltage fluctuates, frequency is in inverse proportion to the square of ( Running supply voltage /115 ) relative to the value in the table. ⋅ When regeneration occurs continuosly such cases as running speed frequently changes or vertical feeding, consult us or a dealer. Note) 2. If the effective torque is within the rated torque, there is no limit in regenerative brake. |
| Rated rotational speed (r/min) | 3000 |
| Rated rotational Max. speed (r/min) | 5000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.036 |
| Recommended moment of inertia ratio of the load and the rotor | 30 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
| Rotary encoder: specifications | 2500 P/r Incremental |
| Rotary encoder: Resolution | 10000 |
Brake specifications
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 0.29 or more |
| Engaging time (ms) | 25 or less |
| Releasing time (ms) | 20 (30) or less |
| Exciting current (DC) (A) | 0.26 |
| Releasing voltage (DC) (V) | 1 or more |
| Exciting voltage (DC) (V) | 24 ± 10 % |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Note4) Specified releasing time is obtained with the use of surge absorber for brake (Z15D151 by SEMITEC Corporation or equivalent). ( ) represents the actually measured value using a diode (200 V, 1 A or equivalent) |
Permissible load
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 147 |
| During assembly: Thrust load A-direction (N) | 88 |
| During assembly: Thrust load B-direction (N) | 117 |
| During operation: Radial load P-direction (N) | 68 |
| During operation: Thrust load A, B-direction (N) | 58 |
Panasonic MINAS E MUMA011P1T Servo Motor 100V 100W
- Brand: Panasonic
- Product Code: MUMA011P1T
- Availability: 10
-
$1,000.00
- Ex Tax: $1,000.00
Tags: MUMA011P1T