Schneider LXM32SD30M2 Motion servo drive - Lexium 32-single phase supply voltage 115/230V - 0.8/1.6kW
| range of product |
Lexium 32
|
|
|---|---|---|
| product or component type |
Motion servo drive
|
|
| device short name |
LXM32S
|
|
| format of the drive |
Book
|
|
| network number of phases |
Single phase
|
|
| [Us] rated supply voltage |
100...120 V (- 15...10 %)
200...240 V (- 15...10 %) |
|
| supply voltage limits |
170...264 V
85...132 V |
|
| supply frequency |
50/60 Hz (- 5...5 %)
|
|
| network frequency |
47.5...63 Hz
|
|
| EMC filter |
Integrated
|
|
| continuous output current |
10 A (f = 8 kHz)
|
|
| output current 3s peak |
15 A at 115 V for 5 s
|
|
| maximum continuous power |
800 W at 115 V
|
|
| nominal power |
0.8 kW at 115 V (f = 8 kHz)
|
|
| line current |
12.9 A, THDI of 135 % at 115 V, without line choke
9.9 A, THDI of 72 % at 115 V, with external line choke of 2 mH 14.1 A, THDI of 86 % at 230 V, with external line choke of 2 mH |
| switching frequency |
8 kHz
|
|
|---|---|---|
| overvoltage category |
III
|
|
| leakage current |
<= 30 mA
|
|
| output voltage |
<= power supply voltage
|
|
| electrical isolation |
Between power and control
|
|
| type of cable |
Single-strand IEC cable (for θ = 50 °C) conductor material:
copper 90 °C ,wire insulation material: XLPE/EPR
|
|
| electrical connection |
Terminal cable 3 mm² AWG 12 (CN8)
|
|
| tightening torque |
0.5 N.m (CN8)
|
|
| discrete input number |
2 capture
|
|
| discrete input type |
Capture (CAP)
|
|
| sampling duration |
0.25 ms
|
|
| discrete input voltage |
24 V DC for capture
|
|
| discrete input logic |
Positive (compliment of STO_A, compliment of STO_B) at State 0:
< 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
|
|
| response time |
<= 5 ms (compliment of STO_A, compliment of STO_B)
|
|
| discrete output number |
3
|
|
| discrete output type |
Logic (DO) 24 V DC
|
|
| discrete output voltage |
<= 30 V DC
|
|
| discrete output logic |
Positive or negative (DO) conforming to EN/IEC 61131-2
|
|
| contact bounce time |
<= 1 ms (compliment of STO_A, compliment of STO_B)
|
|
| braking current |
50 mA
|
|
| response time on output |
250 µs (DO) discrete
|
|
| safety function |
STO (safe torque off), integrated
|
|
| safety level |
SIL 3 conforming to EN/IEC 61508
|
|
| communication interface |
Integrated SERCOS III
Integrated Modbus |
|
| connector type |
RJ45 (labelled CN7) :Modbus
|
|
| commissioning port |
2-wire RS485 multidrop Modbus
|
|
| transmission rate |
9600, 19200, 38400 bps for bus length of 40 m Modbus
|
|
| number of addresses |
Modbus
|
|
| status LED |
1 LED (red) servo drive voltage
|
|
| signalling function |
Display of faults in 7 segments
|
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| product compatibility |
Servo motor BMH (70 mm, 2 motor stacks)
|
|
| width |
68 mm
|
|
| height |
270 mm
|
|
| depth |
237 mm
|
|
| product weight |
2.1 kg
|
| electromagnetic compatibility |
Conducted EMC conforming to EN 55011 class A group 1
|
|
|---|---|---|
| standards |
EN/IEC 61800-3
|
|
| product certifications |
CSA
|
|
| IP degree of protection |
IP20 conforming to EN/IEC 60529
|
|
| vibration resistance |
1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
|
|
| shock resistance |
15 gn for 11 ms conforming to EN/IEC 60028-2-27
|
|
| pollution degree |
2 conforming to EN/IEC 61800-5-1
|
|
| environmental characteristic |
Classes 3C1 conforming to IEC 60721-3-3
|
|
| relative humidity |
Class 3K3 (5 to 85 %) without condensation conforming to IEC
60721-3-3
|
|
| ambient air temperature for operation |
0...50 °C conforming to UL
|
|
| ambient air temperature for storage |
-25...70 °C
|
|
| type of cooling |
Integrated fan
|
|
| operating altitude |
<= 1000 m without derating
|
Schneider LXM32SD30M2 Motion servo drive
- Brand: Schneider
- Product Code: LXM32SD30M2
- Availability: 10
-
$1,000.00
- Ex Tax: $1,000.00
Tags: LXM32SD30M2