• Schneider TSXCFY21 Motion control module - for stepper motors - Unity Pro - 2 axes - 5.6 W

Schneider TSXCFY21 Motion control module - for stepper motors - Unity Pro - 2 axes - 5.6 W

Main
range of product
Modicon Premium Automation platform
product or component type
Motion control module
product specific application
For stepper motors
software designation
Unity Pro
Complementary
I/O modularity
2 axes
pulse frequency
<= 187 kHz
power dissipation in W
5.6 W
input type
Current sink auxiliary input conforming to EN/IEC 61131 type 2
Resistive amplifier input
discrete input logic
Negative amplifier input
Positive auxiliary input
input voltage
24 V 7 mA auxiliary input
5 V 4.5 mA amplifier input
input voltage limits
19...30 V auxiliary input
voltage state 1 guaranteed
< 2 V amplifier input
>= 11 V auxiliary input
current state 1 guaranteed
>= 6 mA auxiliary input
voltage state 0 guaranteed
<= 5 V auxiliary input
> 3.6 V amplifier input
current state 0 guaranteed
<= 2 mA auxiliary input
input impedance
3400 Ohm auxiliary input
input immunity
< 250 µs auxiliary input for homing cam and event inputs
15...30 µs amplifier input for loss of step input
3000...10000 µs auxiliary input for limit switch, emergency stop and external stop inputs
3000...16000 µs amplifier input for amplifier fault input
power supply monitoring
0...14 V auxiliary input at fault state
18...24 V auxiliary input at OK state
maximum detection time
< 30 ms auxiliary input from fault to OK state
> 1 ms auxiliary input from OK to fault state
input compatibility
With 2-wire/3-wire sensor auxiliary input
output type
Open collector PNP brake output conforming to EN/IEC 61131-2
RS422, TTL 5 V open collector NPN compatible amplifier output
output differential voltage
+/- 2 V <= 100 Ohm amplifier output
output short-circuit current
< 150 mA amplifier output
permissible common mode voltage
<= 7 V amplifier output
permissible differential voltage
<= 12 V amplifier output
output voltage
24 V DC 19...30 V brake output
nominal output current
0.5 A < 0.3 mA 0.625 A brake output
voltage drop
< 1 V at state on brake output
switching time
< 0.25 ms brake output
output compatibility
Positive logic DC inputs (resistance <= 15 kOhm) brake output
short-circuit protection
Thermal tripping via program or automatically brake output
output overload protection
Current limiter brake output
output overvoltage protection
Zener diode brake output
reverse polarity protection
Reverse mounted diode on supply brake output
speed profile path
Trapezoidal
operating mode
AUTO
Direct drive mode
Manually
OFF
checks
Amplifier, limits switches, emergency stop
Consistency of commands
Correct execution by software position limits, loss of step
Sensor power supply
Short circuit (one signalling bit per channel)
Validity of parameters
optional commands
Boost
Brake
local signalling
2 LEDs green axis diagnostics available (CH.)
1 LED green module operating (RUN)
1 LED red external fault (I/O)
1 LED red internal fault, module failure (ERR)
electrical connection
1 connector HE-10 20 pins
2 connectors SUB-D 15
current consumption
100 mA 24 V DC
650 mA 5 V DC
module format
Standard
product weight
0.48 kg

Environment
ambient air temperature for operation
0...60 °C
ambient air temperature for storage
-25...70 °C
relative humidity
5...95 % without condensation
operating altitude
<= 2000 m

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
TSXCFY21

Schneider TSXCFY21 Motion control module - for stepper motors - Unity Pro - 2 axes - 5.6 W

Schneider
2025-05-25
  • Brand: Schneider
  • Product Code: TSXCFY21
  • Availability: 10
  • $1,000.00

  • Ex Tax: $1,000.00

Tags: TSXCFY21