Altivar Process ATV900

Variable speed drive

ATV9B0

Modular version

Synchronous motors
Asynchronous motors

Cabinet mount

Mechanical mounting kits
Power connection
Set of fuses
1 control unit
1 front cover
2 power module 200 kW

Integrated conforming to EN/IEC 61800-3 category C3 with <= 300 m motor cable maxi

IP00 conforming to IEC 61800-5-1 for IP21 or IP54 cabinet integration
IP00 conforming to IEC 60529 for IP21 or IP54 cabinet integration

UL type 1 UL 61800-5-1 cabinet integration
UL type 12 UL 61800-5-1 cabinet integration

Forced convection

50...60 Hz +/- 5 %

3 phases

500 V - 10...15 %

220 kW at 500 V (normal duty)
160 kW at 500 V (heavy duty)
220 kW at 500 V (normal duty) regenerative mode
160 kW at 500 V (heavy duty) regenerative mode

278 A at 500 V (normal duty)
204 A at 500 V (heavy duty)
231 A at 500 V (normal duty) regenerative mode
167 A at 500 V (heavy duty) regenerative mode

50 kA

241 kVA at 500 V (normal duty)
176 kVA at 500 V (heavy duty)
200 kVA at 500 V (normal duty) regenerative mode
145 kVA at 500 V (heavy duty) regenerative mode

340 A at 2.5 kHz (normal duty)
275 A at 2.5 kHz (heavy duty)
340 A at 2.5 kHz (normal duty) regenerative mode
275 A at 2.5 kHz (heavy duty) regenerative mode

408 A during 60 s (normal duty)
412.5 A during 60 s (heavy duty)
408 A during 60 s regenerative mode (normal duty)
412.5 A during 60 s regenerative mode (heavy duty)

0.1...599 Hz

2.5 kHz

2...4.9 kHz adjustable with derating factor

STO (safe torque off) SIL 3

Ethernet/IP
Modbus serial
Modbus TCP

Slot A : communication module for Profibus DP V1
Slot A : communication module for Profinet
Slot A : communication module for DeviceNet
Slot A : communication module for CANopen daisy chain RJ45
Slot A : communication module for CANopen SUB-D 9
Slot A : communication module for CANopen screw terminals
Slot A : communication module for EtherCAT
Slot A/slot B/slot C : digital and analog I/O extension module
Slot A/slot B/slot C : output relay extension module
Slot B : analog encoder interface module
Slot B : resolver encoder interface module
Slot B : digital encoder interface module for 5/12 V

Adjustable
Not available in permanent magnet motor law
Automatic whatever the load
Can be suppressed

Linear adjustable separately from 0.01...9999 s

Safe torque off motor
Motor phase break motor
Safe torque off drive
Overheating drive
Short-circuit protection drive
Motor phase break drive
Overspeed drive
Break on the control circuit drive
Overvoltages on the DC bus drive
Overload of output voltage drive
Line supply overvoltage drive
Line supply phase loss drive
Line supply undervoltage drive
Overcurrent between output phases and earth drive
Thermal protection motor
Thermal protection drive

0.012/50 Hz analog input
0.1 Hz display unit

Removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 control
Screw terminal line side
M10 x 2 bars motor

2 RJ45 for Ethernet IP/Modbus TCP on terminal
1 RJ45 for Modbus serial on terminal

2-wire RS 485 for Modbus serial

RTU for Modbus serial

10/100 Mbit/s for Ethernet IP/Modbus TCP
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial

8 bits, configurable odd, even or no parity for Modbus serial

No impedance for Modbus serial

For Modbus serial

Slave for Modbus TCP

Software-configurable voltage AI1, AI3 0...10 V DC 30 kOhm 12 bits
Software-configurable current AI1, AI3 0...20 mA/4...20 mA 250 Ohm 12 bits
Software-configurable voltage AI2 +/- 10 V DC 30 kOhm 12 bits
Software-configurable voltage AI2 0...10 V DC 30 kOhm 12 bits

<= 5 % full load conforming to IEEE 519

1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

2 EN/IEC 61800-5-1

1.5 mm peak to peak 2...13 Hz IEC 60068-2-6
0.5 gn 13...200 Hz IEC 60068-2-6

4 gn 11 ms IEC 60068-2-27

5...95 % without condensation conforming to IEC 60068-2-3

40...50 °C with derating factor
-5...40 °C without

-40...70 °C

<= 2000 m with current derating above 1000m

Chemical pollution resistance class 3C3 EN/IEC 60721-3-3
Dust pollution resistance class 3S3 EN/IEC 60721-3-3

EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1

UL
TÜV
REACH
CUL

CE