Schneider LXM32CD30M2 Motion servo drive - Lexium 32- single phase supply voltage 115/230V - 0.8/1.6kW
| range of product |
Lexium 32
|
|
|---|---|---|
| product or component type |
Motion servo drive
|
|
| device short name |
LXM32C
|
|
| format of the drive |
Book
|
|
| network number of phases |
Single phase
|
|
| [Us] rated supply voltage |
100...120 V (- 15...10 %)
200...240 V (- 15...10 %) |
|
| supply voltage limits |
85...132 V
170...264 V |
|
| supply frequency |
50/60 Hz (- 5...5 %)
|
|
| network frequency |
47.5...63 Hz
|
|
| EMC filter |
Integrated
|
|
| continuous output current |
10 A (f = 8 kHz)
|
|
| output current 3s peak |
15 A at 115 V for 5 s
30 A at 230 V for 5 s |
|
| maximum continuous power |
800 W at 115 V
2200 W at 230 V |
|
| nominal power |
0.8 kW at 115 V (f = 8 kHz)
1.6 kW at 230 V (f = 8 kHz) |
|
| line current |
12.9 A, THDI of 135 % at 115 V, without line choke
12.7 A, THDI of 135 % at 230 V, without line choke 9.9 A, THDI of 72 % at 115 V, with external line choke of 2 mH 14.1 A, THDI of 86 % at 230 V, with external line choke of 2 mH |
| switching frequency |
8 kHz
|
|
|---|---|---|
| overvoltage category |
III
|
|
| leakage current |
<= 30 mA
|
|
| output voltage |
<= power supply voltage
|
|
| electrical isolation |
Between power and control
|
|
| type of cable |
Single-strand IEC cable (for θ = 50 °C) conductor material:
copper 90 °C ,wire insulation material: XLPE/EPR
|
|
| electrical connection |
Terminal cable 3 mm² AWG 12 (CN8)
Terminal cable 5 mm² AWG 10 (CN1) Terminal cable 5 mm² AWG 10 (CN10) |
|
| tightening torque |
0.5 N.m (CN8)
0.7 N.m (CN1) 0.7 N.m (CN10) |
|
| discrete input number |
2 safety
6 logic |
|
| discrete input type |
Logic (DI)
Safety (compliment of STO_A, compliment of STO_B) |
|
| sampling duration |
0.25 ms (ANA1+/ANA1-, ANA2+/ANA2-) for analog
0.25 ms (DI) for discrete |
|
| discrete input voltage |
24 V DC for logic
24 V DC for safety |
|
| discrete input logic |
Positive (compliment of STO_A, compliment of STO_B) at State 0:
< 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1 Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
|
| response time |
<= 5 ms (compliment of STO_A, compliment of STO_B)
|
|
| discrete output number |
5
|
|
| discrete output type |
Logic (DO) 24 V DC
|
|
| discrete output voltage |
<= 30 V DC
|
|
| discrete output logic |
Positive or negative (DO) conforming to EN/IEC 61131-2
|
|
| contact bounce time |
<= 1 ms (compliment of STO_A, compliment of STO_B)
0.25 µs...1.5 ms (DI) |
|
| braking current |
50 mA
|
|
| analogue input number |
2
|
|
| response time on output |
250 µs (DO) discrete
|
|
| absolute accuracy error |
< +/- 0.5 %
|
|
| linearity error |
< +/- 0.1 %
|
|
| analogue input type |
Analog input (ANA1+/ANA1-, ANA2+/ANA2-), differential +/- 10 V
input impedance: >= 20 Ohm, resolution: 14 bits
|
|
| control signal type |
Pulse train output (PTO) RS422 <= 500 kHz <= 100 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <= 10 kHz <= 1 m Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <= 200 kHz <= 10 m Pulse/direction (P/D), A/B, CW/CCW RS422 <= 1000 kHz <= 100 m Servo motor encoder feedback |
|
| protection type |
Against reverse polarity :inputs signal
Against short-circuits :outputs signal |
|
| safety function |
STO (safe torque off), integrated
|
|
| safety level |
SIL 3 conforming to EN/IEC 61508
PL = e conforming to ISO 13849-1 |
|
| communication interface |
Integrated Modbus
|
|
| connector type |
RJ45 (labelled CN7) :Modbus
|
|
| commissioning port |
2-wire RS485 multidrop Modbus
|
|
| transmission rate |
9600, 19200, 38400 bps for bus length of 40 m Modbus
|
|
| number of addresses |
Modbus
|
|
| status LED |
1 LED (red) servo drive voltage
|
|
| signalling function |
Display of faults in 7 segments
|
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| product compatibility |
Servo motor BMH (70 mm, 2 motor stacks)
Servo motor BMH (70 mm, 3 motor stacks) Servo motor BMH (100 mm, 1 motor stacks) Servo motor BMH (100 mm, 2 motor stacks) Servo motor BMH (100 mm, 3 motor stacks) Servo motor BMH (140 mm, 1 motor stacks) Servo motor BSH (70 mm, 2 motor stacks) Servo motor BSH (100 mm, 1 motor stacks) Servo motor BSH (100 mm, 2 motor stacks) |
|
| width |
68 mm
|
|
| height |
270 mm
|
|
| depth |
237 mm
|
|
| product weight |
2 kg
|
| electromagnetic compatibility |
Conducted EMC at class A group 1 conforming to EN 55011
Conducted EMC at class A group 2 conforming to EN 55011 Conducted EMC at environment 2 category C3 conforming to EN/IEC 61800-3 Conducted EMC at category C2 conforming to EN/IEC 61800-3 Conducted EMC at environments 1 and 2 conforming to EN/IEC 61800-3 Electrostatic discharge immunity test at level 3 conforming to EN/IEC 61000-4-2 Susceptibility to electromagnetic fields at level 3 conforming to EN/IEC 61000-4-3 1.2/50 µs shock waves immunity test at level 3 conforming to EN/IEC 61000-4-5 Electrical fast transient/burst immunity test at level 4 conforming to EN/IEC 61000-4-4 Radiated EMC at class A group 2 conforming to EN 55011 Radiated EMC at category C3 conforming to EN/IEC 61800-3 |
|
|---|---|---|
| standards |
EN/IEC 61800-3
EN/IEC 61800-5-1 |
|
| product certifications |
UL
RoHS CSA TÜV |
|
| IP degree of protection |
IP20 conforming to EN/IEC 60529
IP20 conforming to EN/IEC 61800-5-1 |
|
| vibration resistance |
1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC
60068-2-6
1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6 |
|
| shock resistance |
15 gn for 11 ms conforming to EN/IEC 60028-2-27
|
|
| pollution degree |
2 conforming to EN/IEC 61800-5-1
|
|
| environmental characteristic |
Classes 3C1 conforming to IEC 60721-3-3
|
|
| relative humidity |
Class 3K3 (5 to 85 %) without condensation conforming to IEC
60721-3-3
|
|
| ambient air temperature for operation |
0...50 °C conforming to UL
|
|
| ambient air temperature for storage |
-25...70 °C
|
|
| type of cooling |
Integrated fan
|
|
| operating altitude |
<= 1000 m without derating
> 1000...3000 m with conditions |
Schneider LXM32CD30M2 Motion servo drive
- Brand: Schneider
- Product Code: LXM32CD30M2
- Availability: 10
-
$1,000.00
- Ex Tax: $1,000.00
Tags: LXM32CD30M2