Lexium 32

Motion servo drive

LXM32C

Book

Single phase

100...120 V (- 15...10 %)
200...240 V (- 15...10 %)

170...264 V
85...132 V

50/60 Hz (- 5...5 %)

47.5...63 Hz

Integrated

3 A (f = 8 kHz)

6 A at 115 V for 5 s
9 A at 230 V for 5 s

300 W at 115 V
900 W at 230 V

0.3 kW at 115 V (f = 8 kHz)
0.5 kW at 230 V (f = 8 kHz)

5.4 A, THDI of 159 % at 115 V, without line choke
4.5 A, THDI of 166 % at 230 V, without line choke
5.2 A, THDI of 90 % at 115 V, with external line choke of 2 mH
6.3 A, THDI of 107 % at 230 V, with external line choke of 2 mH

8 kHz

III

< 30 mA

<= power supply voltage

Between power and control

Single-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR

Terminal cable 3 mm² AWG 12 (CN8)
Terminal cable 5 mm² AWG 10 (CN1)
Terminal cable 5 mm² AWG 10 (CN10)

0.5 N.m (CN8)
0.7 N.m (CN1)
0.7 N.m (CN10)

2 safety
6 logic

Logic (DI)
Safety (compliment of STO_A, compliment of STO_B)

0.25 ms (ANA1+/ANA1-, ANA2+/ANA2-) for analog
0.25 ms (DI) for discrete

24 V DC for logic
24 V DC for safety

Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1
Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1

<= 5 ms (compliment of STO_A, compliment of STO_B)

5

Logic (DO) 24 V DC

<= 30 V DC

Positive or negative (DO) conforming to EN/IEC 61131-2

<= 1 ms (compliment of STO_A, compliment of STO_B)
0.25 µs...1.5 ms (DI)

50 mA

2

250 µs (DO) discrete

< +/- 0.5 %

< +/- 0.1 %

Analog input (ANA1+/ANA1-, ANA2+/ANA2-), differential +/- 10 V input impedance: >= 20 Ohm, resolution: 14 bits

Pulse train output (PTO) RS422 <= 500 kHz 100 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <= 10 kHz 1 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <= 200 kHz 10 m
Pulse/direction (P/D), A/B, CW/CCW RS422 <= 1000 kHz 100 m
Servo motor encoder feedback

Against reverse polarity :inputs signal
Against short-circuits :outputs signal

STO (safe torque off), integrated

SIL 3 conforming to EN/IEC 61508
PL = e conforming to ISO 13849-1

Integrated Modbus

RJ45 (labelled CN7) :Modbus

2-wire RS485 multidrop Modbus

9600, 19200, 38400 bps for bus length of <= 40 m Modbus

1...247 Modbus

1 LED (red) servo drive voltage

Display of faults in 7 segments

CE

Vertical +/- 10 degree

Servo motor BMH (70 mm, 1 motor stacks)
Servo motor BSH (55 mm, 1 motor stacks)
Servo motor BSH (55 mm, 2 motor stacks)
Servo motor BSH (55 mm, 3 motor stacks)
Servo motor BSH (70 mm, 1 motor stacks)

48 mm

270 mm

237 mm

1.7 kg

Conducted EMC at class A group 1 conforming to EN 55011
Conducted EMC at class A group 2 conforming to EN 55011
Conducted EMC at environment 2 category C3 conforming to EN/IEC 61800-3
Conducted EMC at category C2 conforming to EN/IEC 61800-3
Conducted EMC at environments 1 and 2 conforming to EN/IEC 61800-3
Electrostatic discharge immunity test at level 3 conforming to EN/IEC 61000-4-2
Susceptibility to electromagnetic fields at level 3 conforming to EN/IEC 61000-4-3
1.2/50 µs shock waves immunity test at level 3 conforming to EN/IEC 61000-4-5
Electrical fast transient/burst immunity test at level 4 conforming to EN/IEC 61000-4-4
Radiated EMC at class A group 2 conforming to EN 55011
Radiated EMC at category C3 conforming to EN/IEC 61800-3

EN/IEC 61800-5-1
EN/IEC 61800-3

UL
RoHS
TÜV
CSA

IP20 conforming to EN/IEC 60529
IP20 conforming to EN/IEC 61800-5-1

1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6

15 gn for 11 ms conforming to EN/IEC 60028-2-27

2 conforming to EN/IEC 61800-5-1

Classes 3C1 conforming to IEC 60721-3-3

Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3

0...50 °C conforming to UL

-25...70 °C

Natural convection

<= 1000 m without derating
> 1000...3000 m with conditions